產品分類Product Center
| 單梁橋式起重機 | ||||||
| ||||||
| 雙梁橋式起重機 | ||||||
| ||||||
| 旋臂式起重機 | ||||||
| 潔凈室起重機 | ||||||
| 門式起重機 | ||||||
| ||||||
| 起重機配件 | ||||||
| ||||||
| QD橋式起重機 | ||||||
| 電動平車 | ||||||
|
- 服務熱線 -135-2866-9221
|
華瑞起重機有限公司與國產LH電動葫蘆橋式起重機、LD電動單梁橋式起重機的比較 Compared with domestic Huarui Crane Co. LH electric hoist bridge crane, LD electric single girder bridge crane |
|||
|
比較內容 Comparison content |
華瑞起重機標準配置 Standard configuration for HUARUI |
國內LH、LD型起重機 通用 配置 Common configuration of domeseic LH or LD crane |
華瑞起重機優勢 Advantages of HUARUI |
|
電動葫蘆工作級別 Working level of electric hoist |
可達M5、M6 To reach M5 or M6 |
一般為M3、M4 In general,M3 or M4 |
工作級別更高， 適應更高的工況要求 Higher working level to meet requirements of stricter conditions |
|
安全監控器 Safety monitor |
標準配置 Standard configuration |
無 Without |
監控葫蘆的運行 過程，便于維護維修 monitor operation of hoist, easy to maintenance |
|
起升制動器 Lifting brake |
100萬次壽命、 |
壽命低、 需要經常調整或更換 Low service life for constant adjustment or replacement |
免維護，使用更安全 Maintenance-free and safe operation |
|
起升限位開關 Lifting linit switch |
上升兩級，下降一級 Cam structure,two levels for ascending |
斷火限位器，上升一級 Fire cutoff limiter with higher ascending level |
定位更準確，有效 預防吊鉤沖頂 More precise positioning to avoid hook heading effectively |
|
鋼絲繩 Steel wire rope |
鍍鋅鋼絲繩公稱 抗拉強度2160N/mm2 Galvanized steel wire rope with nominal tensile strength of 2,160N/mm2 |
通用鋼絲繩、公稱 抗拉強度 1670N/mm2 Common steel wire rope with nominal tensile strength of 1,670N/mm2 |
鋼絲繩更耐腐蝕， 使用壽命更長 Larger coverage scope for hook to increase utilization rate of workshop |
|
吊鉤的極限尺寸 Extreme dimensions for hook |
較小 Less |
相差約500~1000mm Difference is about 500mm to 1,000mm |
吊鉤覆蓋范圍更大， 增大廠房利用率 Larger coverage scope for hook to increase utilization rate of workshop |
|
所有減速器 All gearboxes |
硬齒面減速器， 修型處理 Hardening speed reducer with trimming |
軟齒面減速器 Softening speed reducer |
承載能力更大，噪 音小，使用壽命長 Larger bearing capacity,little noise and longer service life |
|
大小車運行 Operation for travelling and traversing |
變頻雙速 Frequency conversion for speed |
一般為單速 In general,single speed is adopted |
運行更平穩， 減少沖擊和重物的晃動 More stable operation to reduce shock and vibration of heavy articles |
|
端梁加工 Processing of end carriage |
運用加工中心加工 Processing of special processing center |
通用鏜床加工， 多次裝夾 Processing by common boring mill for multiple holding |
保證加工質量， 減少啃軌等不良現象 To guarantee high processing quality and reduce adverse phenomena |
|
主端梁連接 Connection between maingiader and end carriage |
10.9級高強度螺栓連接 Grade 10.9high-strength bolt connection |
普通6.8級8.8級螺栓連接 Ordinary Grade6.8 or 8.8 bolt connection |
連接強度更高 Higher connection strength |
|
油漆類型 Paint type |
丙烯酸或環氧類油漆 Crylic acid or epoxy type paint |
醇酸類油漆 Alcohol acid type paint |
油漆性能及壽命更高 Longer service life and higher paint performance |
|
總功率 Total power |
較小 Less |
較大 More |
節能降耗 Energy conservation and consumption reduction |
經理微信
服務熱線
袁小姐
手機站
返回頂部
